Skip to main content
To top
Card payment
International Shipping
Customer Service
Norwegian website | Contact us
Company
Favourites
Log in

Fiber Optic Closure with Multi-out Gel Seals, FOSC-400D5G

SKU: CX8683-000
Stock:
Commscope
excl. VAT

The FOSC-400G is a single-ended, environmentally sealed enclosure for fiber management in the outside plant network. Prepared for gel seal. Splice closure consists of few parts and is very easy to install. FOSC-400D5G/24/288

Splice closure in plastic in the FOSC-400G series. Prepared for gel seal. Splice closure consists of few parts and is very easy to install.

  • Prepared for gel seal
  • Indoor/outdoor use
  • Casing class IP68
  • Capacity of 288 splices (250 to 250 µm)
  • 24 splices in each tray
  • 12 trays (1 tray included)
  • 5 round cable entries + 1 oval

Dimensions: 505x290 mm The splice closure fits the Cable Management frame type B4.

Accessory products
Tray, A4, A8, A2G, B2G, D5G

Tray for FOSC splice closures. Fits FOSC-400A4/24/48 and FOSC-400A8/24/96

032054-000
Cable management frame, D5

The Cable Management frame fits several types of splice closures on the market.

402871
Bend limiter tube insertion in oval hole

The bend limiter is a chain with a given minimum diameter that is used when uncut fibre tubes shall be led through the oval hole of a splice closure. With the chain, the tubes can be led into the closure in a safe manner without risking breakage.

525538-000
Fiber optic Splitter, OCC1P, 1:32, 9/125/250

The OCC1P 1:32 optical splitters comes with clips for mounting in the FOSC splice closures.

CC8312-000
Fiber optic Splitter, OCC1P, 1:64, 9/125/250

The OCC1P 1:64 optical splitters comes with clips for mounting in the FOSC splice closures.

CC8313-000
Fiber optic Splitter, OCC1P, 1:8, 9/125/250

The OCC1 1:8 optical splitters comes with clips for mounting in the FOSC splice closures.

CC8542-000
Fiber optic Splitter, OCC1P, 1:16, 9/125/250

The OCC1P 1:16 optical splitters comes with clips for mounting in the FOSC splice closures.

CC8544-000
Fiber optic Splitter, OCC1P, 1:4, 9/125/250

The OCC1P 1:4 optical splitters comes with clips for mounting in the FOSC splice closures.

CC9545-000
Gel seal, 1x10.5-14 mm, BX6, BX8, FX, 400G

Gel seal for 1 cable

CX6532-000
Gel seal, 2x7.5-11 mm, BX6, BX8, FX, 400G

With this gel seal you can increase the number of cable entries in certain splice closures. For all FOSC-400G, FIST-GCO2-BX and FIST-GCO2-FX

CX6533-000
Gel seal, 3x6.5-8 mm, BX6, BX8, FX, 400G

With this gel seal you can increase the number of cable entries in certain splice closures.

CX6534-000
Gel seal, 4x4-7 mm, BX6, BX8, FX, 400G

With this gel seal you can increase the number of cable entries in certain splice closures. For all FOSC-400G, FIST-GCO2-BX and FIST-GCO2-FX

CX6535-000
Gel seal, 8x3-5 mm, BX6, BX8, FX, 400G

With this gel seal you can increase the number of cable entries in certain splice closures. For all FOSC-400G, FIST-GCO2-BX and FIST-GCO2-FX

CX6536-000
Gel seal, 16x0-3 mm, BX6, BX8, FX, 400G

With this gel seal you can increase the number of cable entries in certain splice closures. For all FOSC-400G, FIST-GCO2-BX and FIST-GCO2-FX

CX6537-000
Gel seal, oval, 2x6-15 mm, 400G

With this gel seal you can increase the number of cable entries in certain splice closures. For oval port in the FOSC-400G

CX8716-000
Bracket, cable entrance port, 400D5G

The bracket can be fastened to FOSC-400D5G. It is often used when taking many small cables into the splice closure via gel seals.

CY3839-000
Heat shrink tube, B4/D5+400G, round

Round heat shrink tube for the splice closures FOSC-400B4/24/96, FOSC-400B4/24/144, FOSC-400D5/24/288, FOSC-400D5/72/576 and FOSC-400G.

EF7965-000
Fibre protector, B4/D5+400G, oval

Oval heat shrink tube for the splice closures FOSC-400B4/24/96, FOSC-400B4/24/144, FOSC-400D5/24/288, FOSC-400D5/72/576 and FOSC-400G.

EF7966-000
Fiber optic Splice protector, 60 mm, 100-pack

Pretreated for short shrinking time

PS-3A-X
Work stand, FOSC-400B4/D5

The use of a work stand makes working with the rigging and mounting of splice closures easier. The stand fits all the splice closures in the FOSC series.

110770-000
Tray, splitter OCC1x

Tray for mounting fiber optic splitters in the FOSC splice closures.

825194-000
Pole bracket, wooden pole, composite, 2 pcs

Pole mount bracket for wooden poles made of composite materials. The bracket fits both Cable Management frames (B4 and D5) and provides a good distance between the Cable Management frame and the mast. 

2857981-2
Fiber optic Splice protector, 45 mm, 100-pack

Only one opening prevents wrong fibre positioning

PS-3A-X-45
Adjustable Fiber Optic Cable Slack Storage

Adjustable cable management frame suitable for both small and large closures. The slim profile minimizes visibility.  

402771

Recently viewed

Fiber Optic Closure with Multi-out Gel Seals, FOSC-400D5G

The FOSC-400G is a single-ended, environmentally sealed enclosure for fiber management in the outside plant network. Prepared for gel seal. Splice closure consists of few parts and is very easy to install. FOSC-400D5G/24/288

CX8683-000
Links
Language
My account