We deliver quality tools suited for fibre optical work. Combined with good craftmanship the right tools give a precise result. Remember to always have the correct cleaning tools ready when working with fibre optics.
The tool consists of a plier with replaceable knife trays ranging over five different tube dimensions. The knife trays have two knives so that the tubes are split into two halves, which makes it simple to remove the tubes in a safe manner. When splicing and dropping fibre with loose tube it may be beneficial to split the tubes length-wise over a shorter length, a so-called window cut.
5-Channel Mid-Span Fiber Access Tool. The buffer tube splitter is used for splitting fibre tubes length-wise in order to get access to some of the optical fibres in the tube without cutting all of them. The buffer tube splitter fits tube dimensions from 1.9 to 3.0 mm.
Cletop connector cleaner is made for efficient cleaning of optical connectors during installation and service. The cleaner contains a cleaning tape which is pulled forward every time the cleaner is used. The cleanerâs cleaning tape may be refilled.
Cletop connector cleaner is made for efficient cleaning of optical connectors during installation and service. The cleaner contains a cleaning tape which is pulled forward every time the cleaner is used. The cleanerâs cleaning tape may be refilled.
For cleaning optical connectors in those cases where the contamination cannot be cleaned with dry cleaning and fiber optical fibres prior to splicing and termination. The cleaning fluid comes in a tight 85 g pump/spray container that can be stored in your existing tool sets without risking spills.
The wipes can be used for dry cleaning, but are often used together with cleaning fluid for fiber optical connectors of the type TravelSAFE. The wipes come in a dispenser with 90 sheets.
Your session has now expired. Please click "OK" to refresh the page and avoid any loss of unsaved data. If you were logged in, you will need to log in again.