PATCH CORDS

Fiber optic connectors are Japanese quality supplied by Seikoh Giken. Fiber cables we use are supplied by Prysmian Draka and Corning.
If you do not find the product you need on our website, please contact us.

PIGTAILS

Pigtails for terminating cables with splicing.

0.9 mm cable
Fast cladding (Tight Buffer, TB)
Tight buffer with easy stripping of 100 mm
Different colored cable for simple identification

PATCH CORD, SINGLE MODE

Single mode patch cords are offered both with 1-fiber cable and 2-fiber figure-8 cable. The products are available in a number of different configurations with different connectors and lengths. The same product may be delivered in three different colors allowing visual separation of different services in the ODF.

DOUBLE PATCH CORD, MULTIMODE

Double multi-mode patch cords are delivered as 2-fiber figure-8 cable. These are available in a number of different configurations with different connectors, fiber types and lengths.

2.0 mm 2-fiber figure-8 cable (zip-cord)
2.8 mm available upon request
Different colored cable for simple identification

DUPLEX PATCH CORD - BREAK-OUT

The patch cords are made of 2 pcs. of 2 mm cords protected by a common coating. The products are offered with different connectors and fibre types and are used for direct connection of fibre optic equipment.

Figure 0 construction, 3x5 mm
Indoor cable Break-out
FR-LSZH construction, fire class Dca-s2d2a1
Integrated rip-cord in outer coating
Different coloured cables for simple identification

DUPLEX PATCH CORDS UNIBOOT

Demand for increased fiber port density requires new High Density optical patch cords. Our new patch cords in UniBoot design contain 2 fibers in 1 cable therefore cutting the number of cables in half when routing. The simple construction makes it possible to reverse the polarity from A-B to A-A without the need for any tools.

The Uniboot patch cords are delivered with A-B polarity as shown below. The fibres are physically connected black-black and white-white:

TRUNK CABLE, MPO-MPO

Trunk cables and fan-out cables for indoor use are delivered with 12 or 24 optical fibers. Trunk cables are delivered with MPO connectors at both ends. Fan-outs are used as converters between MPO and LC.